Durostrip - Water Based Paint Stripping From FUZE Products

TEL: 01543 226449

 

SAFER PAINT REMOVAL WITH DUROSTRIP

From the manufacturers of Biostrip 20 comes a new Maximum Strength paint removal product. Still with the same environmental/ user profile. Designed to perform.


The Durostrip range of paint stripping products are water based, more environmentally friendly and less hazardous than traditional products. They are capable of performing in the toughest of applications and situations. 
Our cutting edge formulations produce excellent results when stripping a wide range of paints from almost any type of surface.


Durostrip will quickly remove a huge range of coatings including polyester and epoxy powder coatings, water based coatings, primers, oil based paints, emulsion, masonry paint and gloss. It is effective on many substrates, including metal, wood, plaster, plastics, GRP, stone, brick, marble, concrete and many more. 
#paintstripper

Product Benefits Include:

• Water based 
• Non Irritant
• Non flammable
• Non Toxic - safer for the user and the environment than traditional methylene chloride based products
• Non Caustic - Does not darken wood, and does not cause burns
• Economical - Thixotropic (thickened) solution clings to vertical surfaces, causing no drips, no runs, no waste.

Usage:

Ensure that the area to be stripped is clean and free of grease.

INFORMATION

Brush a generous layer of Durostrip on to the surface. Allow the paint to blister or soften (depending upon the paint type). This should take between 30 and 60 minutes but will vary depending upon ambient temperature, paint type, thickness and number of layers.
(Do not allow Durostrip to dry out, apply more product if this starts to happen.)
Once the paint has completely softened or blistered it can be removed by rinsing , scraping or power washing with water.
Clean the area thoroughly with a mild soap solution, then finally rinse with clean water

BUY NOW