Biostrip Plus is a high quality, water based paint and varnish remover that delivers professional results quickly and easily
It can remove paint and varnish from any surface including wood, metal, masonry, concrete and glass. Blistering or softeneing of the paint is visibly quickly.
This product is non flammable, non corrosive and non toxic, making it safer to use than traditional Methylene Chloride based products.
Suitable for use on a wide range of coatings including emulsion, masonry paint, primer, varnish etc
Building upon the success of our Biostrip 20 - Biostrip Plus is our latest advance in high performance paint removers. We believe that this is our "toughest" product yet. New Biostrip Plus is water based and safer to use than traditional paint strippers. It is low in VOC's, non toxic and non flammable. Easy to rinse off after use so it does not require the use of damaging abrasives on delicate substrates.
Biostrip Plus is fast acting, with blistering or softening of the paint visible very quickly.
The thixotropic (thickened) formulation will adhere to any surface, reducing drips to a minimum and avoiding waste.
Economical in use - 1 Litre will treat approximately 5 square metres
Instructions for use:
- Ensure surface being stripped is clean and oil free
- Brush a thick coat of Biostrip Plus on to the surface
- Leave in place until the paint has completely blistered or softened (time taken will vary depending upon paint type, number of layers and ambient temperature)
- Remove paint with a damp sponge or cloth. If the substrate is not delicate a scraper can be used. Where appropriate a power washer is also effective
- If any paint remains repeat the above steps (this may be necessary in intricate areas or where there are layers of differing paint types)
- Wash the area down with fresh soapy water and allow to dry
Created to deliver outstanding results - Biostrip Plus is coloured green so it is easy to see which areas have been treated.
No comments:
Post a Comment