Stripping Metal with Biostrip

Biostrip is a revolutionary new water based paint stripper that is fast and effective on the really tough industrial paints used to coat metal such as fusion bonded powder coats, 2 pack epoxy's, hammerite etc. Biostrip is really easy and friendly to use, is non hazardous and what's more is not affected by the paint it strips and does not evaporate. So a dip tank of the stuff lasts a loooooong time!

Anyway stripping metal bits with biostrip in a dip tank is simplicity itself - just immerse the parts in biostrip, wait 20 minutes or so and then take them out. The paint generally just drops off in nice big sheets. Multiple coats of paint might take a little longer, but the end result is the same, the paint just drops off.

Here is a picture of what a piece of metal that has been polyester powder coated and then stripped in biostrip looks like when taken out of the tank of stripper:

The plate was obviously only half immersed in the stripper for 20 minutes just to show how well the biostrip just lifts the paint from the metal.

You can find out more information on biostrip from their website Biostrip