This fantastic new range is available to order NOW via our website (www.fuze-products.co.uk), for all your metal pre-treatment needs.
Our natural conversion coating technology is a group of product technologies functionally similar to traditional iron and zinc phosphate on steel and chrome conversion coats on aluminium and zinc. The functionality of these new technologies is reflected in their ability to match or better traditional technologies in performance in accelerated corrosion tests such as:
- neutral salt spray
- acetic acid salt spray
- pressure cooker tests, etc
Fuze's natural phosphating technology is safer for users, does not present any known hazards to the environment and in most cases used solutions can be discharged to sewer (subject to local water authority approval).
The environmental profile is further enhanced by its very high conversion efficiencies which means very little sludge is generated in use, and consequently very long periods between tank dumps.
Our Metal Pre-Treatment Range (click on each product name to read more)
FUZE CW1 -
A 'natural' iron phosphate system based on materials derived from renewable plant sources. A highly efficient product, economic to use, and does not have a tendancy to sludge.
This product does not contain any solvent or toxic-heavy chemicals.
*Use at 0.5 to 1% by volume in water
*Temp: 30c to 45c
FUZE ZPAD -
A superior alternative to traditional paint pre-treatments such as chromate, zinc and iron phosphates. Quick, clean, safer-to-use.
out-performs traditional technologies in accelerated weather tests
no sludge; eliminates tank dumps
does not contain hazardous chemicals or heavy metals
does not contain harmful solvents
100% biodegradable organic content
environmentally friendlier - non-hazardous, low BOD/COD
FUZE Natural Cleaner -
A powerful product that will remove a range of oils, greases and soils. Will not foam if used between 30c and 50c. Also suitable for use in soak tanks.
Recommendations for use:
Dilution - designed to run at concentrations of 3% to 5%v/v in town mains water
Temperature time - Temperatures between 30c and 50c are recommended. Will clean a wide range of soils, oils and greases successfully within the time range of 1 minute to 5 minutes. In general, the higher the cleaner temperature and the greater the agitation, then the quicker the cleaning will be
Application - designed for the cleaning of aluminium and alloy, steel and cast iron parts prior to conversion coating. Parts should be sprayed with a working solution of the product within the recommended temperature range
No comments:
Post a Comment