How to use Snow Foam

How to use snow foam

Snow foam is designed to reduce swells when washing you car as minimal contact is needed from the user. It can be used as pre wash product but many professionals decide to use it to complete a touchless wash of the vehicle.

To use a Snow Foam product you will need:

• A pressure washer
• A professional Foam Lance
• A high quality Snow Foam product (this will help to produce good quality, thick foam).

Step 1) Dilute Snow Foam as instructed by the product instructions

Step 2) Swap the end of the pressure washer to a special Snow Foam Lance.

Step 3) Point Lance and cover the vehicle in a thick layer of foam, this will allow the foam to cling to the vehicle enabling it to soften and lift any dirt or grit which will then just slide off paint.

Step 3) Allow to stand for several minutes.

Step 4) Remove Snow Foam Lance and use the original end of the pressure washer.

Step 5) Rinse off any remaining Snow Foam. Most dirt will have been removed without any contact being needed, which reduces chance of swirls and wash marks.

www.fuze-products.co.uk