The ultimate guide to getting rid of artex - 100% safely!

REMOVING artex just got a whole lot easier...

In the days before Biostrip, the removal of a substance as notoriously tricky as artex meant calling in the professionals - and often paying a hefty price for its removal, whether on walls or ceilings.

The reason for this is that, traditionally, artex has contained asbestos, which is of course highly dangerous. Problems arise because the artex is harmless while it remains on the wall or ceiling, but becomes a major health hazard during the process of removing it.

Commonly, unwanted asbestos has been removed by being scraped, chipped or chiseled off. Doing this causes the asbestos to enter the atmosphere (in the form of a dust), leaving anyone who inhales the dust with serious - and frequently fatal - health problems.

Thankfully, there is now Biostrip Artex Remover. This uniquely-formulated product gets rid of ALL risk of asbestos escaping into the air, meaning there's ZERO chance of you or anyone around you inhaling the lethal powder.

COULDN'T BE EASIER...FROM UNWANTED ARTEX TO A PERFECT, FAULTLESS FINISH IN AROUND TWO HOURS!

 

Here's how it works...

 

The revolutionary formula of Biostrip Artex Remover does more than just guarantee that no asbestos will be released into the air. Like all Biostrip products, it complies with our twelve-step guarantee of safety and environmental features that apply to all Biostrip products.

BIOSTRIP: SAFETY AND ENVIRONMENTAL FEATURES

• PROVEN PERFORMANCE

• FAST-ACTING

• VOC FREE

• SAFER FOR USERS, NEARBY CHILDREN OR PETS

• NON-TOXIC, NON HAZARDOUS

• SOLVENT FREE

• WATER-BASED

• LOW ODOUR

• NON-FLAMMABLE

• NON CAUSTIC

• NON IRRITANT

• NON-OZONE DEPLETING

What's more, because of its unique, safer formula, Biostrip Artex Remover doesn't require protective masks to be worn while in use, and is totally safe to use in closed, confined spaces.

 And here's how to do it!

• Firstly, apply the Biostrip Artex Remover generously onto any artexed ares. Don't worry about what its painted with; Biostrip Artex Remover works brilliantly whether your artex is covered with gloss or emulsion paints.

• Once the Artex Remover has been generously spread over the surface, give it some time to soak in. This should only take around 30 to 60 minutes.

• Next, after the Artex Remover has soaked into the artex thoroughly, it becomes softened. This softened artex can then be removed by scraping it. Any trace of asbestos within your artex will now pose no risk to your health....the newly-softened artex makes it impossible for the asbestos dust to be released into the atmosphere.

• Finally, once the artex has been scraped away, all that remains is to simply wash the area down and allow the area to dry thoroughly, giving you a smooth, artex-free surface that is ready for however you want to decorate it.

----------------------------------------------------------

  If you have any questions, queries or comments, or if you'd like to become a stockist/distributor of Biostrip products, drop us a line! 

**To browse or buy from the entire Biostrip range of products, click HERE