Monday 11 January 2016

Removing Mould from the Home


 

 

 

 

Removing Mould from the Home

With record rainfall this Autumn, many people have developed a mould problem in their homes.
Most of us find mould growing in our homes at some point. Usually in the bathroom, shower room or kitchen where humidity is high. It is generally found on the ceiling or walls.
Since mould spores can cause some health problems it is always a good idea to have a remedy to hand.
As well as the health risks, mould is ugly to look at and should be treated as soon as possible. The longer you leave the problem, the harder it will be to get rid of it effectively. If you have asthma you should do this type of cleaning with a face mask on so you don't breathe in any spores.
To reduce the risk of Mould follow the guidelines below:
  • Mould loves dark, poorly ventilated rooms - open the windows and doors and keep the air moving through the room.
  • Mould loves warmth and moisture - if condensation is building up, open the window and wipe down damp surfaces.
  • If you have mould in the bathroom grout, it is almost impossible to remove. It is best to remove the grout, treat with a Mould Remover then regrout.
Bleach is commonly used on mould, but it doesn't treat the problem at its roots, so the problem soon reoccurs. Also it can simply discolour the mould so you can't see it.
There are a range of safe to use, specialist products such as MOGO on the market today. FUZE Products manufacture a full range of products including Mould Removers, Damp Seals and Paint Additives.

Mould is an accumulation of fungi that starts to grow when the conditions are right, such as in the presence of water and warmth. Unfortunately in rooms such as bathrooms, it is impossible to remove these conditions so it is important to create a good flow of air. The presence of an extraction fan or an open window is essential.

If the water is coming from a leak, or even a blocked gutter, it is important to fix the problem, otherwise the mould will simply reoccur time after time.

How you treat the mould depends upon where it is and how bad it is. Firstly it should be cleaned off using a Mould RemovalProduct. The area should then be allowed to dry thoroughly. In areas where the mould has been caught early, or is minimal, this may be enough to remove it. Although bear in mind that if the area continues to get wet, such as in a shower cubicle or bath area, you may need to repeat this process every few months.

If the area is badly affected, or has been mouldy for a long period of time, it may be necessary to follow up with a coat of Damp Seal, or if it is a painted location, such as a ceiling or wall – painted with an AntiMould Paint.

No comments:

Post a Comment